Let’s take a look at the milling department Starrett During our visit they were running production on a few sizes of their No. 98 machinist level. It was a wonderful surprise to see so many vintage Kearny & Trecker and Cincinnati milling machines still in service and being used every day to manufacture not only raw castings but many tools Starrett makes. The 98 level, like many of their tools, will go through several stages of manufacturing. Milling the bottom of the level and involuted V-groove
1:09
Let’s take a look at the milling department Starrett During our visit they were running production on a few sizes of their No. 98 machinist level. It was a wonderful surprise to see so many vintage Kearny & Trecker and Cincinnati milling machines still in service and being used every day to manufacture not only raw castings but many tools Starrett makes. The 98 level, like many of their tools, will go through several stages of manufacturing. Milling the bottom of the level and involuted V-groove
3.9K viewsJun 19, 2023
FacebookAbom79
Milling Department at the @starrett_tools factory in Athol was one of my personal favorites! The sites of the old school vintage mills like Kearney & Trecker, to the smell of cutting oils filling the room, to the unbelievable tool crib. When I visited, they were milling the base of the No. 98 machinist levels. The tool crib, where they store all of the milling cutters and tooling, was incredible! It was great getting to see up close and personal much of the toolings that helps provide their prec
1:28
Milling Department at the @starrett_tools factory in Athol was one of my personal favorites! The sites of the old school vintage mills like Kearney & Trecker, to the smell of cutting oils filling the room, to the unbelievable tool crib. When I visited, they were milling the base of the No. 98 machinist levels. The tool crib, where they store all of the milling cutters and tooling, was incredible! It was great getting to see up close and personal much of the toolings that helps provide their prec
47K viewsApr 27, 2024
FacebookAbom79
Starrett Combination Set with Square, Center and Non-Reversible Protractor Head and Blade - 12" Blade Length, Hardened Steel, 4R Graduation Type - 9-12-4R
2:32
Starrett Combination Set with Square, Center and Non-Reversible Protractor Head and Blade - 12" Blade Length, Hardened Steel, 4R Graduation Type - 9-12-4R
11 months ago
amazon
Starrett Steel Combination Square with Square Head - 4" Blade Length, Cast Iron Heads, Hardened Steel, Reversible Lock Bolt, 4R Graduation Type - 11H-4-4R
4:28
Starrett Steel Combination Square with Square Head - 4" Blade Length, Cast Iron Heads, Hardened Steel, Reversible Lock Bolt, 4R Graduation Type - 11H-4-4R
100 viewsDec 13, 2006
amazon
Part 2 of our @starrett_tools factory tour in Athol, Massachusetts will show some of their screw machine departments as well as the indicator parts department. The Davenport was busy matching thumb screws for the bevel protractors. The small green machine was shaping a rack for a long travel drop indicator. Machining small parts fascinate me! I’m so used to always working on large parts and machines. It was great seeing all of those department manufacturing those teeny tiny parts for Starrett pr
1:25
Part 2 of our @starrett_tools factory tour in Athol, Massachusetts will show some of their screw machine departments as well as the indicator parts department. The Davenport was busy matching thumb screws for the bevel protractors. The small green machine was shaping a rack for a long travel drop indicator. Machining small parts fascinate me! I’m so used to always working on large parts and machines. It was great seeing all of those department manufacturing those teeny tiny parts for Starrett pr
508.1K viewsApr 27, 2024
FacebookAbom79
Accurately measuring the bore using my Starrett No. S229 telescoping gage and No. 439 mic. The bronze bushing that presses in measured 2.2525-2.2530 so I was shooting for a target size of 2.250. Telescope gages are very accurate tools when used correctly. It takes time to learn the proper techniques for adjusting them in a bore and for the “feel” when measuring over them. I common misconception people make is that the ends of the gages are flat when in fact they have radii to match the bore size
0:49
Accurately measuring the bore using my Starrett No. S229 telescoping gage and No. 439 mic. The bronze bushing that presses in measured 2.2525-2.2530 so I was shooting for a target size of 2.250. Telescope gages are very accurate tools when used correctly. It takes time to learn the proper techniques for adjusting them in a bore and for the “feel” when measuring over them. I common misconception people make is that the ends of the gages are flat when in fact they have radii to match the bore size
516K viewsMay 25, 2023
FacebookAbom79
Aligning Compound Slide with Starrett Tools
1:10
Aligning Compound Slide with Starrett Tools
3.9K views4 months ago
TikToksc.shooter.01
3:57
Inside Micrometer
135.4K viewsJun 15, 2011
YouTubemachiningmoments Brad
8:39
Low Profile Mill Clamps
253K viewsMay 10, 2020
YouTubeTom Make Here
1:03:58
Starrett Factory Tour!
701.7K viewsMar 13, 2017
YouTubeNYC CNC
29:08
Threading Metric Titanium Rod
236.7K viewsMar 24, 2020
YouTubeAbom79
6:16
Reading Dial Indicators
163.2K viewsJun 29, 2020
YouTubeDrivelineMaster
21:22
Micrometer Care & Repair With Bob P2
35.3K viewsOct 26, 2018
YouTubedoubleboost
1:29
Kurt Single Station Hydraulic Vise Operation
37.3K viewsJul 6, 2015
YouTubeKurt Manufacturing
1:45
Calibrating a Depth Micrometer
20.1K viewsDec 21, 2020
YouTubeWisTech Open (formerly Wisc-Online)
29:29
SNS 225 Part 1: Headstock & Tailstock Alignment, Starrett Wall Charts
236.1K viewsAug 4, 2018
YouTubeAbom79
3:36
How to Zero a Micrometer
196.1K viewsJan 18, 2018
YouTubeCool Stuff Guys Like
1:54
How to Read an Inch Micrometer by Starrett
135.2K viewsOct 20, 2014
YouTubeMSI Viking
11:31
HOW TO USE EDGE-FINDERS in machining
84K viewsJul 28, 2020
YouTubeTigermoth Racing
16:42
Starrett - Shaft alignment fundamentals
11.4K viewsJan 24, 2017
YouTubeบริษัท ตรงกมล จำกัด (Trong Kamol Co., Ltd.)
17:43
Calibrating a Starrett #216 Micrometer TIPS #418 tubalcain
36K viewsApr 29, 2018
YouTubemrpete222
15:36
Shop Talk 10: Telescope Gages & How They're Used
135.4K viewsSep 21, 2016
YouTubeAbom79
6:58
How to Read an Inch Micrometer.wmv
792.3K viewsJan 28, 2011
YouTubeetprof
32:22
Mill Skills 8 : Basic Work Holding & Fixturing!
188.3K viewsMar 20, 2021
YouTubeBlondihacks
6:36
The Best CNC Stock Hold Down Method
30.8K viewsAug 14, 2018
YouTubeThe Whimsical Woodworker
33:50
Make a Center Gauge Attachment TIPS #423 tubalcain
116.3K viewsFeb 7, 2018
YouTubemrpete222
4:22
Two Mitutoyo Digital micrometers and a brain dead starrett.
10.4K viewsJul 2, 2015
YouTubeMax_Marz
5:54
Physio Neck Exercises Stretch and Relieve Routine (UPDATE)
310.9K viewsSep 18, 2019
YouTubeMichelle Kenway
5:23
Old Machinists Mill Trick To Quickly Find a Rod Centerline
998.8K viewsDec 23, 2017
YouTubeArnold's Design
16:26
Setting Work and Tool Offsets on the Haas CNC Mill - Clark Magnet High School SSP.
378.3K viewsApr 17, 2017
YouTubeClark Magnet Engineering & Manufacturing
See more
Static thumbnail place holder